How to Load a Mini Jet Boat in a Truck Bed (No Trailer, Two People, 90 Seconds)

The whole reason to own a Wave-Vo is that it rides in the truck like a cooler. Here's how we do it at every demo day.

What you need

  • A pickup (any bed length) or an SUV with the rear seats down.
  • Two people for the lift, or one person with a carrier dolly (coming 2027).
  • Two ratchet straps and a moving blanket or bed mat.

Step 1: Pull the battery

The 70-lb battery lifts out in about 10 seconds. Set it in the cab or strap it in the bed separately. Now the hull is 126 lb.

Step 2: Lift and slide

One person on each side at the grab handles. Lift the bow onto the tailgate, then walk the stern up and slide the hull forward. Bow toward the cab. It fits a 6.5' bed with the tailgate up and a 5.5' bed with the tailgate down. Mid-size trucks: tailgate down.

Step 3: Strap it

One strap across the hull just behind the console to the bed anchors; one from the bow eye forward. Snug, not crushing. Blanket under the keel if your bed isn't lined.

Step 4: Launch anywhere

No ramp needed. Back up to a bank, beach or low dock, slide the hull off the tailgate with both of you on the handles, set it in knee-deep water, drop the battery in, go. Total time from parking to riding: about 90 seconds.

Loading back up wet

Same in reverse. Let it drain a minute, pull the battery first. Rinse at home if you were in salt.

Will it fit my truck? → · Wave-Vo Electric Mini Jet Boat →